Displaying Cliplink Log Data; Detailed Data Display - Sony DSR-70 Operating Instructions Manual

Displaying ClipLink Log Data

To display ClipLink log data, hold down the ENTRY/
SHIFT button and press the TRIM –/LIST button.
The following ClipLink log data list appears in the
monitor.
CLIPLINK LOG DATA LIST
(003/196)
REEL NO XXXXXXXX
1 M 00:01:23:00 OK
2 M 00:02:35:00 OK
* 3 M 00:03:50:00 OK
4 M 00:04:03:00 OK
5 M 00:04:48:00 NG
6 M 00:04:53:00 OK
7 M 00:05:08:00 OK
8 I 00:06:13:00 IP
Mark IN/cue timecode
M = Mark IN point indication
C = cue point indication
I = Index picture address indication
To return to the original monitor display
To exit from the ClipLink log data list and return to the
original monitor display, hold down the ENTRY/
SHIFT button and press the TRIM–/LIST button.
92
Chapter 6 ClipLink Operation
To check more details related to the data item selected
on the ClipLink log data list, proceed as follows.
TRIM–/LIST button
– +
TRIM
CLIP
LIST MARK
LINK
ENTRY SHIFT
IN OUT
ENTRY/SHIFT
button
1
2
OK/NG status or
IP (index picture)
indication
Data serial number

Detailed Data Display

Using the shuttle/jog dial, move the selection mark
(asterisk) to the data item for which you wish to
display details.
Press the search button.
While you hold the search button down, the
detailed data display appears.
CLIPLINK LOG DATA LIST
(003/196)
MARK IN 00:03:50:00
MARK OUT 00:04:03:00
OK/NG OK
SCENE NO 001
TAKE NO 03
SHUTTLE JOG
2
1
Mark IN point
display (cue point
and index picture
addresses not
displayed)