Connecting An External Decoder; Connecting A Decoder - Sony AT100 Operating Instructions Manual

Connecting an External Decoder

You can watch or record external decoder (PAY-TV/Canal Plus analogue decoder)
programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder's
mains lead from the mains when connecting the decoder.
To watch the connected external decoder (PAY-TV/Canal Plus analogue decoder)
programmes while the recorder is in standby mode, set "Standby Mode" to "Mode 2" in the
"Basic" setup (page 118). If not, the picture will not appear.
Note that when you set "LINE 1 In" to "Decoder" in step 7 of "Setting external decoder (PAY-
TV/Canal Plus analogue decoder) programme positions" (page 33), you will not be able to
select "L1" because Line 1 will become a dedicated line for the decoder.

Connecting a decoder

to AERIAL IN
Aerial cable
(supplied)
to T LINE 3 – TV
to AERIAL OUT
32
TV
to SCART input
SCART cord
(not supplied)
to i LINE 1/DECODER
External decoder (PAY-TV/
Canal Plus analogue decoder)
SCART cord
(not supplied)
DVD recorder