Siemens SINAMICS G120D Getting Started Manual page 9

During operation and for a short time after switching-off the converter, the surfaces of the
converter can reach a high temperature. Avoid coming into direct contact with the converter
surface.
This equipment is suitable for use in a power system up to 65,000 symmetrical amperes
(rms), for the maximum rated voltage + 10 % when protected by an appropriate standard
fuse (refer to the catalogue for the type of fuse).
Repair
Repairs on equipment may only be carried out by Siemens Service, by repair centers
authorized by Siemens or by authorized personnel who are thoroughly acquainted with all
the warnings and operating procedures contained in this manual.
Any defective parts or components must be replaced using parts contained in the relevant
spare parts list.
Dismantling and disposal
CAUTION
The packaging of the inverter is re-usable. Retain the packaging for future use.
Easy-to-release screw and snap connectors allow you to break the unit down into its
component parts. You can recycle these component parts, dispose of them in accordance
with local requirements or return them to the manufacturer.
Getting Started
Getting Started, FW V4.5, A5E03404762A AB
WARNING
CAUTION
WARNING
Safety notes
7