Controlling The Tv Or The Av Receiver (Amplifier) With The Supplied Remote - Sony DVP-S705D Operating Instructions Manual

Controlling the TV or the AV Receiver (Amplifier) with the
Supplied Remote Z
If you adjust the remote signal, you can control your TV
with the supplied remote. Default setting is to control
Sony TVs with the g mark.
When you connect the player to a Sony AV receiver
(amplifier), you can also set the input of the receiver
(amplifier) to this player with the supplied remote.
1 2
Number
4 5
7 8
buttons
0
Controlling TVs with the remote
Hold down 1/u (POWER), and enter your TV's
manufacturer's code (see the table) using the
number buttons. Then release 1/u (POWER).
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote commander, the
code number may reset to 01 (Sony). Reset the appropriate code
number.
1/u (POWER)
3
6
9
Manufacturer Code
number
Sony (default) 01
Gold Star 03, 04
Philips 06, 08
Miver 09
Blaupunkt 10, 21
Grundig 11
Saba 12, 13
Panasonic 17, 49
Samsung 23
Hitachi 24
Sanyo 25
Pioneer 26
Mitsubishi 27, 28, 50
Sharp 29
Aiwa 32
JVC 33
Toshiba 38
Siemens 39
Thomson 43
Loewe 45
Orion 47, 48
Ferguson 52
NEC 66
TEAC 67
Akai 68
Nokia 69
61