Specifications - Sony DVP-S705D Operating Instructions Manual

Specifications

CD/DVD player
Laser Semiconductor laser
Signal format system
NTSC /PAL
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±0.5
dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5
dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 115 dB (AUDIO OUT (1, 2)
connectors only)
Harmonic distortion
Less than 0.002%
Dynamic range
More than 100 dB (DVD)
More than 98 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs and inputs
Jack Output
type level
Phono 2 Vrms
AUDIO OUT
jacks (at 50 kilohms)
(1, 2)
Optical –18 dBm
DIGITAL OUT
output
(OPTICAL)
connector
Phono 0.5 Vp-p
DIGITAL OUT
jack
(COAXIAL)
Phono 1.0 Vp-p
VIDEO OUT
jacks
(1, 2)
S VIDEO OUT 4-pin Y: 1.0 Vp-p
(1, 2) mini DIN
Y: 1.0 Vp-p
C: 0.3 Vp-p
(PAL)
0.286 Vp-p
(NTSC)
COMPONENT Phono Y: 1.0 Vp-p
VIDEO OUT jacks
(Y, C /B-Y,
B
C /B-Y,
C /R-Y)
R B
C /R-Y:
R
0.7 Vp-p
PHONES
5.1 OUTPUT
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 7.
Load impedance
* The signals from AUDIO OUT (1, 2 ) connectors and 5.1 ch L,R
connectors are measured. When you play the PCM sound tracks
Over 10 kilohms with 96 kHz sampling frequency, the output signals from the
DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz
(sampling frequency).
Wave length: 660 nm
Design and specifications are subject to change without notice.
75 ohms terminated
75 ohms,
sync negative
75 ohms,
sync negative
75 ohms terminated
75 ohms,
sync negative
75 ohms
Jack Output Load impedance
type level
Phone 12 mW 32 ohms
jack
Phono 2 Vrms Over 10 kilohms
jacks (at 50 kilohms)
220 - 240V AC, 50/60 Hz
110V AC, 50/60 Hz
See page 2 for further informations.
19 W
430 98 305 mm (w/h/d)
incl. projecting parts
4.0 kg
5 ˚C to 35 ˚C
5% to 90%
67