Controlling Your Tv Or Av Amplifier (Receiver) With The Supplied Remote - Sony DVP-K370 Service Manual

QQ
3 7 63 1515 0
N When you have already registered a
password
The display for entering the password
appears.
PARENTAL CONTROL
Enter password, then press
4
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
The display for setting the playback
limitation level appears.
PARENTAL CONTROL
LEVEL:
STANDARD:
5
Press X/x to select "STANDARD,"
then press ENTER.
The selection items for " STANDARD"
are displayed.
PARENTAL CONTROL
LEVEL:
STANDARD:
6
Press X/x to select a geographic area
as the playback limitation level, then
press ENTER.
The area is selected.
When you select " OTHERS t," select
and enter a standard code in the table on
page 61 using the number buttons.
7
Press X/x to select "LEVEL," then
press ENTER.
The selection items for " LEVEL" are
displayed.
TE
L 13942296513
60
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Notes
• Depending on the unit being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Controlling TVs with the remote
Number
buttons
1
Hold down TV [/1, and enter your TV's
manufacturer's code (see "Code
numbers of controllable TVs" below)
using the number buttons.
2
Release TV [/1.
www The remote is set to perform the
followings:
TV [/1
Turns the TV on or off
VOL +/– * Adjusts the volume of the TV
TV/VIDEO Switches the TV's input
source between the TV and
.
other input sources
62
http://www.xiaoyu163.com
PARENTAL CONTROL
LEVEL:
STANDARD:
8:
7:
6:
5:
.
ENTER
8
Select the level you want using X/x,
then press ENTER.
Parental Control setting is complete.
PARENTAL CONTROL
LEVEL: 4:
STANDARD:
The lower the value, the stricter the
OFF
USA
limitation.
To turn off the Parental Control function
Set " LEVEL" to " OFF" in Step 8.
To play a disc for which Parental Control is
set
1 Insert the disc and press H.
The display for entering your password
appears.
2
Enter your 4-digit password using the
OFF
number buttons, then press ENTER.
USA
USA
The player starts playback.
OTHERS
z Hint
If you forget your password, remove the disc and
repeat Steps 1 to 3 of " Parental Control (limited
playback)." When you are asked to enter your
password, enter " 199703" using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press H. When the display for entering
your password appears, enter your new password.
* Once you set a code number for your AV
amplifier (receiver), the VOL +/– buttons on the
remote control the AV amplifier's volume only. If
you would rather control the TV's volume, set the
code number to " 90" (default) to control the TV's
volume again.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code number
Sony 01(default), 03, 04
Aiwa 32
Akai 68
Blaupunkt 10, 21
Grundig 10, 11
Hitachi 24
JVC 33
LG 06
Loewe 45
Mitsubishi 27, 28, 50
TV [/1
Mivar 09
NEC 66
VOL +/–
Nokia 15, 16, 69
TV/VIDEO
Orion 47, 48
Panasonic 17, 49
Philips 06, 07, 08
Pioneer 26
Saba 12, 13
Samsung 22, 23
Sanyo 25
Sharp 29
Siemens 39
TEAC 67
Telefunken 36
Thomson 43
x ao Toshiba 38
y
i
http://www.xiaoyu163.com
8
Notes
• When you play discs which do not have the
OFF
Parental Control function, playback cannot be
OFF
limited on this player.
• Depending on the disc, you may be asked to
NC17
change the parental control level while playing
R
the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
cancelled, the level returns to the previous level.
Area Code
Standard
Argentina
PG13
USA
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Q Q
3 6 7 1 3
Controlling the volume of your
AV amplifier (receiver) with the
remote
Number
buttons
1
Hold down [/1, and enter your AV
amplifier (receiver)'s manufacturer's
code (see the table below) using the
number buttons.
2
Release [/1.
You can control the volume of the AV
amplifier (receiver) using VOL +/–.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
Manufacturer
Sony
Denon
Kenwood
Onkyo
Pioneer
Sansui
Technics
Yamaha
u163
If you would rather control the volume of
your TV
Repeat Steps 1 and 2 above and enter the code
.
number 90 (default).
1-15
2 9 9 4 2 8
Changing the password
1
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
2
Press X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for " PARENTAL
CONTROL" appear.
3
Press X/x to select "PASSWORD
Code Standard Code
t," then press ENTER.
number number
The display for entering the password
2044 Korea 2304
appears.
2047 Malaysia 2363
4
Enter your 4-digit password using the
2046 Mexico 2362
number buttons, then press ENTER.
2057 Netherlands 2376
5
Enter a new 4-digit password using the
2070 New Zealand 2390
number buttons, then press ENTER.
2079 Norway 2379
6
To confirm your password, re-enter it
2090 Pakistan 2427
using the number buttons, then press
2092 Philippines 2424
ENTER.
2115 Portugal 2436
2165 Russia 2489
If you make a mistake entering your
2174 Singapore 2501
password
2109 Spain 2149
Press C before you press ENTER and input
2248 Sweden 2499
the correct number.
2238 Switzerland 2086
If you make a mistake
2254 Thailand 2528
Press O RETURN.
2276 United 2184
Kingdom
To turn off the display
Press DISPLAY repeatedly until the display
is turned off.
1 5 0 5 8 2 9 9 4
[/1
VOL +/–
Code number
80, 88, 89, 91
84, 85, 86
92, 93
81, 82, 83
99
87
m
97, 98
94, 95, 96
co
9 9
2 8 9 9
61
63