Display - Kenwood TK-7180 Instruction Manual

D
ISPLAY
Indicator
6
Displays the zone and channel numbers. Your dealer can
program zone and channel names with up to 12 characters,
in place of numbers. Also displays received 5-tone and
FleetSync messages.
Displays the zone and channel numbers. Also displays list
numbers for Operator Selectable Tones.
Displays the strength of received signals. An antenna and all
3 strength bars represents strong signals while the antenna
by itself (no strength bars) represents weak signals.
Appears when Monitor or Squelch Off is activated.
Appears when the Talk Around function has been activated.
Appears when you are using Scan mode or when the selected
zone is a Voting or Free Channel Call zone.
Flashes when you receive a message. Lights when a
message is stored in the queue memory.
Appears when the selected channel is programmed as
priority. represents Priority Channel 1,
Channel 2, and
This icon is not used on this transceiver.
Appears when the Horn Alert function is activated.
Appears when the Scrambler function is activated.
Appears when the Public Address function is activated.
Appears when the selected zone is added to the scanning
sequence.
Appears when the Auto Recording function on the VGS-1
option is activated.
Appears when an Auto Reply Message on the VGS-1 option
is activated.
Appears when the selected channel is added to the scanning
sequence.
Appears when the AUX A function has been activated.
Appears when the AUX B function has been activated.
Appears when the OST function has been activated.
Description
represents Priority Channels 1 and 2.
represents Priority