Releasing the electrical step in an emergency
(manual retraction)
If the electrical step does not automatically
retract, you must manually retract the step and
lock it in order to continue driving.
On the underside of step
#
remove the spring cotters
Remove the washers
#
bars.
2
on both bars
1
3
from the pin.
4
and detach both
Fold the bars
1
into the step's housing.
#
Slide the step into its housing.
#
%
When securing the step for the first time, you
must puncture a foil with the spring cotters.
On both sides, insert the spring cotters
#
through the housing's holes and into the step
as far as they will go.
The step has been secured in its housing.
Platform dropsides
Opening and closing platform dropsides
& WARNING Risk of injury when opening a
loaded dropside!
When opening the dropside locking mecha‐
nisms, the dropside may drop down. This is
particularly the case if it is loaded, i.e. carry‐
ing a load.
Opening and closing
1
53