Roland GR-30 Manual page 92

2. Transmitted Data
Channel Voice Message
Note Off
STATUS SECOND THIRD
9nH kkH 00H
n=MIDI Channel Number
kk=Note Number
Note On
STATUS SECOND THIRD
9nH kkH vvH
n=MIDI Channel Number
kk=Note Number
vv=Velocity
Control Change
Bank Select
STATUS SECOND THIRD
BnH 00H mmH
BnH 20H llH
n=MIDI Channel Number
mm,ll=Bank Number
Modulation
STATUS SECOND THIRD
BnH 01H vvH
n=MIDI Channel Number
vv=Modulation Depth
Foot Type
STATUS SECOND THIRD
BnH 04H vvH
n=MIDI Channel Number
vv=Control Value
* When the Expression Pedal is operated, the GR-30 sends this as the operation
(except some noted setting of the "EXP PEDAL" parameter).
Data Entry
STATUS SECOND THIRD
BnH 06H mmH
BnH 26H llH
n=MIDI Channel Number
mm,ll= Value for the parameter that is selected by RPN.
Volume
STATUS SECOND THIRD
BnH 07H vvH
n=MIDI Channel Number
vv=Volume
* Transmitted the total volume fixed with expression pedal and GK-2A's operation.
Pan
STATUS SECOND THIRD
BnH 0AH vvH
n=MIDI Channel Number
vv=Pan
* The value 0 is left, 64 is center, and 127 is right.
* Transmitted the action of the expression pedal when the "EXP PEDAL" is set to "L-R".
General Purpose #3
STATUS SECOND THIRD
BnH 12H vvH
n=MIDI Channel Number
vv=Control Value
* Transmitted the envelope data of the strings when the "PLAY FEEL" is set to EF1 or
EF2.
94
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:01H - 7FH (1 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H,00H - 7FH,7FH (bank1-bank16384)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 40H - 7FH (0 - 64 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
General Purpose #4
STATUS SECOND THIRD
BnH 13H vvH
n=MIDI Channel Number
vv=Control Value
* Transmitted the operation of onboard WAH function (Pedal 1).
General Purpose #6
STATUS SECOND THIRD
BnH 51H vvH
n=MIDI Channel Number
vv=Control Value
* Transmitted the operation of turning Arpeggiater (or Harmonist) ON or OFF by
"CTRL ARP/HAR" pedal.
General Purpose #7
STATUS SECOND THIRD
BnH 52H vvH
n=MIDI Channel Number
vv=Control Value
* Transmitted the operation of onboard HOLD pedal.
General Purpose #8
STATUS SECOND THIRD
BnH 53H vvH
n=MIDI Channel Number
vv=Control Value
* Transmitted the operation of "CTRL ARP/HAR" pedal when the Arpeggio is held.
Effect 1 (Reverb Send Level)
STATUS SECOND THIRD
BnH 5BH vvH
n=MIDI Channel Number
vv=Control Value
* Transmitted the action of the expression pedal when the "EXP PEDAL" is set to "rE.L".
RPN MSB/LSB
STATUS SECOND THIRD
BnH 65H mmH
BnH 64H llH
n=MIDI Channel Number
mm=Upper byte of the parameter data designated by RPN.
ll=Lower byte of the parameter data designated by RPN.
**RPN**
Control change includes RPNs(registered parameter number), function which are defined
by the MIDI standard. Each RPN may be used to change parameters of equipment.
To effect RPN, first designate the parameter to be controlled using RPN MSB and RPN
LSB, and then specify the value of designated parameter in the data entry.
The GR-30 can transmit only one RPN : pitch bend sensitivity(RPN#0).
RPN Data entry
MSB LSB MSB LSB
00H 00H mmH,00H
(The transmitted lower byte is always 00H.)
Program Change
STATUS SECOND
CnH ppH
n=MIDI Channel Number
pp=Program Number
Pitch Bend Change
STATUS SECOND THIRD
EnH llH mmH
n=MIDI Channel Number
mm,ll=Value
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
0 = Reset,1-63=OFF,64-127=ON
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
0-63=OFF,64-127=ON
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
0-63=OFF,64-127=ON
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
0-63=OFF,64-127=ON
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
Function
pitch bend sensitivity
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H - 7FH (0 - 127)
:0H - FH (0 - 15) 0=ch.1 15=ch.16
:00H,00H - 7FH,7FH (-8192 - +8191)