Selection Of Operating Modes; Selection Of Operating Modes With Internal Machine Control Panel - Siemens SINUMERIK 810M Operating And Programming Manual

2 Operation

2.3.3 Selection of operating modes

2.3.3 Selection of operating modes
2.3.3.1 Selection of operating modes with internal machine
control panel
You call up the following named operating modes:
– PRESET (Actual Value Setting)
– MDI - AUTOMATIC (Manual Data Input / Automatic)
– JOG (Feed / Jog)
– REPOS (Repositioning)
– AUTOMATIC (Automatic operation).
by operating this key on the machine control panel.
PRESET MDI-
AUTOM.
You operate one of these softkeys.
The basic display of the operating mode you selected is shown on the CRT.
2-38
JOG REPOS AUTO-
MATIC
© Siemens AG 1990 All Rights Reserved
11.90
The menu
shows you the
function of each
softkey.
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)