Copying A Program ("Copy") - Siemens SINUMERIK 810M Operating And Programming Manual

3 Operating Sequences
3.1.13 Program management

3.1.13.4 Copying a program ("COPY")

Using the "COPY" function, you can store the same program under a different program
number in the program memory.
This enables you to keep one program with the contents unchanged and make changes to the
copy.
Sequence of operation
PART PROG.-
PROGRAM HANDL.
((Bild 810 M/31 einmontieren))
7 7
% X X
COPY
The control now copies program "%77" and stores a copy it under program number "%5".
Program "%77" remains unchanged!
3-60
Operate the "PART PROGRAM" and
"PROGRAM HANDLING" softkeys one
after the other, in any of the
operating modes
PRESET / JOG / AUTOMATIC /
INC 1 .... INC 10000 / REFPOINIT
= 5
H J
%
© Siemens AG 1990 All Rights Reserved
The relevant CRT display is shown, -
program no. "%77" in the example,
that was the last program to be called.
Using the keyboard, enter:
" % 77 = % 5 ".
Now operate the "COPY"
softkey.
6ZB5 410-0EQ02
SINUMERIK 810M, GA3 (BN)
11.90