Location And Function Of Parts; Front Panel - Sony DSR-1600.GB Operating Instructions Manual

Location and Function of Parts

Front Panel

a POWER switch
POWER
g CONTROL S connector
f HEADPHONES connector
e PHONE LEVEL control knob
a POWER switch
Press the " " side to power the unit on. When the unit is
powered on, the display windows in the front panel lights.
To power the unit off, press the "
b Audio level meters
These show the audio levels of channels 1 to 4 during
playback.
c PB FS (playback audio sampling frequency)
display
Indicates the sampling frequency (48 kHz, 44.1 kHz or 32
kHz) at which audio is recorded on tape.
8
Location and Function of Parts
b Audio level meters
c PB FS display
dB OVER dB dB OVER dB dB OVER dB dB OVER dB
0 0 0 0
0 0 0 0
-12 1 -12 1 -12 1 -12 1
-20 0 -20 0 -20 0 -20 0
-1 -1 -1 -1
-30 -30 -30 -30
-40 -40 -40 -40
-2 -2 -2 -2
1 2 3 4 PB FS 48k44.1k32k
-60 -60 -60 -60
A B
MARK
A Menu control panel (inside of
the door) (see page 9)
" side of the switch.
d Cassette compartment
D Search control section
(see page 12)
C Display section (see page 11)
B Tape transport control section (see page 10)
d Cassette compartment
Accepts DVCAM, DV and DVCPRO (25M)
videocassettes.
For details of usable cassettes, see page 19.
e PHONE LEVEL control knob
Controls the volume of the headphones connected to the
HEADPHONES connector.
f HEADPHONES connector (stereo phone jack)
Connect stereo headphones for headphone monitoring
during playback.
The audio signal you want to monitor can be selected with
the MONITOR SELECT switches on the menu control
panel.
E Remote control
setting section
(see page 13)