Sony DSR-1600.GB Operating Instructions Manual page 76

How to record ClipLink log data
The following describes how to record the various
ClipLink log data items.
OK/NG status
To designate a scene as "NG," press the NG button on the
camera while shooting the scene or at any time before you
begin shooting the next scene.
All scenes that do not receive an "NG" designation are
recorded as "OK" scenes.
(When you exit the VCR recording mode, changing the
OK/NG status is no longer possible.)
Mark IN/OUT point time codes
This data is especially useful when shooting a video
program for which a scenario has been created.
Set the camera to MARK mode before you start shooting.
While shooting, each time you press the camera's TAKE
button, Mark IN and Mark OUT point time codes are
recorded alternately.
Index picture 1
Start
recording
Mark IN
(manual
recording)
76
ClipLink Guide
Index picture 2
End
recording
Mark OUT
(manual
Mark IN
recording)
(manual
recording)
Mark OUT
(manual
recording)
Cue point time codes
This type of data is especially useful when shooting scenes
that may contain unexpected events, such as when
shooting for sports coverage or documentaries.
Set the camera to CUE mode before you start shooting.
While shooting, each time you press the camera's TAKE
button, the current time code is recorded as a cue point
time code.
Start
Index picture 1
recording
Cue point
time code
(manual
Cue point
recording)
time code
Rec IN
(manual
(automatic
recording)
recording)
End
recording
Rec OUT
(automatic
recording)
Cue point
time code
(manual
recording)