14
Capsule recovery
The BSP software provides a mechanism for the SPI flash contents to be recovered if
the board will not boot. For example, if power was lost during a normal SPI flash
update, the board would be unbootable.
Capsule recovery is comprised of the following high-level steps:
building a FVMAIN.fv recovery file
connecting a USB key with this file to the board
booting the board in recovery mode
Note: If you are using the Intel
Guide for details. For other boards, contact your Intel representative for
details on how to boot in recovery mode.
waiting for the recovery firmware to update the SPI flash and reboot the board
Booting in recovery mode is board specific. Please refer to the board user guide for
details.
Alternatively, the SPI flash contents can be recovered using a DediProg* SF100 SPI
Flash Programmer and the associated flashing software to program your board as
described in
Intel
®
Quark™ SoC X1000
BSP Build and Software User Guide
32
®
Galileo board, refer to the Intel
Section
11.
Capsule recovery
®
Galileo Board User
Order Number: 329687-007US