Basic Transactions (Credit And Debit Cards) - VeriFone VX820 Pin Pad Manual

Basic Transactions (Credit and Debit Cards)

Refer to this section for information on what transactions are available and when to
use them.
Begin a Transaction
In general, to begin a non-sales transaction, use the [  ] (VX520) or [
VX680 3G) at the Main Menu or idle prompt to navigate to the transaction type you wish
to perform. Scroll through the menu and press the corresponding [F] key when your desired
transaction appears on the terminal display.
Sale
Perform a credit or debit card sale transaction when the card is present.
Display
Idle Screen
Amount: $ 0.00
What the customer sees:
Sale
$0.00
Tap/Insert/Swipe
APPROVED XXXX
Remove Card
Note:
Failure to obtain an authorization code for a sale may lead to a chargeback.
VX520
Press [F2] to select Sale
Key in amount and press [OK]
Customer is prompted to Tap/Insert/Swipe
or Enter Acct #
1. Customer confi rms the sale amount
2. Selects Chequing or Savings (Debit Only)
3. Enter PIN and press OK
4. While terminal connects, do not remove card
For contactless (tap) transactions, the customer holds their card
over the terminal until the reader fl ashes and/or beeps.
Receipt prints and approval is displayed.
Press [Enter] to print the customer copy.
] (VX820 Duet and
VX820 / VX680
Press [F1] to select Sale
Key in amount and press [OK]
8