Troubleshooting - JVC KD-R991BT Instruction Manual

REFERENCES
Source name Display information (for KD-R792BT)
FM/AM/SW1/SW2 Frequency Clock
to the beginning)
(For FM Radio Data System stations only)
Station name (PS)/Program type (PTY)
Radio text+ title/Radio text+ artist
name (PS)/Program type (PTY) with music synchronisation*
to the beginning)
CD or USB (For CD-DA)
Disc title/Artist
Disc title/Artist with music synchronisation*
(For MP3/WMA/WAV/FLAC files)
Song title/Artist
Playing time
(back to the beginning)
ANDROID When [AUTO MODE] is selected ( 9):
Song title/Artist
Song title/Artist with music synchronisation*
beginning)
PANDORA BT Station name
Album name
synchronisation*
SPOTIFY BT Context title Song title
Time Clock
the beginning)
BT AUDIO Song title/Artist
Song title/Artist with music synchronisation*
beginning)
AUX AUX Clock
beginning)
* The brightness of the button illumination changes and synchronises with the music.
32
ENGLISH
Frequency with music synchronisation*
Radio text Radio text+
Frequency Clock
Track title/Artist Playing time Clock
(back to the beginning)
Album name/Artist Folder name
Clock Song title/Artist with music synchronisation*
Album name/Artist Playing time
(back to the
Shared/Radio Song title Artist name
Playing time Clock Station name with music
(back to the beginning)
Artist name Album name
Context title with music synchronisation*
Album name/Artist Playing time
(back to the
AUX with music synchronisation* (back to the

TROUBLESHOOTING

Symptom
(back Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
Station
(back
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
• Radio reception is poor.
• Static noise while
listening to the radio.
File name
Disc cannot be ejected.
"IN DISC" appears.
Clock
"PLEASE EJECT" appears.
Playback order is not as
intended.
Elapsed playing time is not
correct.
Playing
"NOT SUPPORT" appears
(back to
and track skips.
"READING" keeps flashing.
Clock
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. ( 6)
Connect the antenna firmly.
Press and hold to forcibly eject the disc. Be careful
not to drop the disc when it is ejected.
Make sure nothing is blocking the loading slot when
you eject the disc.
Press , then insert the disc correctly.
The playback order is determined by the file name
(USB) or the order in which files were recorded (disc).
This depends on the recording process earlier.
Check whether the track is a playable format.
( 29, 30)
• Do not use too many hierarchical levels and folders.
• Reload the disc or reattach the USB device.