Using The Snc Privacy Masking Tool - Sony SNC-RX530N User Manual

Using the SNC privacy masking
tool
The SNC privacy masking tool consists of the Main tab
to set the privacy mask positions and the Setting tab to
prepare for connection to the camera.
When you start the SNC privacy masking tool, the
Setting tab is displayed.
Setting tab
Before creating a privacy mask, set the following items
in the Setting tab to allow connection to the camera.
Administrator name: Type the ID of the administrator
of the camera to be connected.
Administrator password: Type the password of the
administrator of the camera to be connected.
Tip
The factory settings of both items are "admin."
Camera address: Type the IP address or host name of
the camera to be connected.
Camera port No.: Type the port number of the camera
to be connected.
When you use a proxy server for camera connection,
check the Use proxy check box and set the following
items.
Proxy server address: Type the IP address or host name
of the proxy server.
Proxy server port No.: Type the port number of the
proxy server.
Preparations for connecting to the camera are now
completed.
Main tab
Set the privacy mask.
Note
If the video codec of the camera is set to H.264, the
Main tab window is not displayed even if you click on
the Main tab.
In this case, select JPEG or MPEG4 in Mode of the
Camera menu (page 40) and operate again.
Viewer
A live image of the camera is displayed. You can specify
the position of the privacy mask in this area.
If you click on the image, the camera moves so that the
clicked point goes to the center of the image.
Panorama image area
The panorama image created with the supplied SNC
panorama creator is displayed.
The positions of the registered privacy masks are shown
with numbers in this area.
If you click on the panorama image, the camera moves
to the clicked point.
Using the SNC privacy masking tool — Masking a Camera Image
97