Common Tab; Ptz Position - Sony SNC-RX530N User Manual

After the detection time, the location
where the car was parked is detected
as an unattended object.
Notes
• You can view an MPEG4 image only in the main
viewer during the setting of the object detection when
Dual codec is selected in the Video codec tab.
• The object detection function does not operate when
H.264 is selected in the Video codec tab.
• The unattended object detection may not work
correctly if the brightness of a scene changes
significantly, for example, when you shoot an outdoor
scene continuously from day to night.
• Unattended object detection may not work correctly if
the image is of flat scene such as a monochrome wall
or floor.
• Before actual use, perform an operation test and
confirm that the object detection function works
correctly.
When the Object detection menu is
displayed for the first time
When you click Object detection, "Security Warning"
is displayed.
When you click Yes, ActiveX control is installed and the
Object detection menu is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
78
Setting the Object Detection Function — Object detection Menu
• When you install ActiveX control, you should be
logged in to the computer as Administrator.
• When you are using Windows XP Service Pack 2 or
Windows Vista, the information bar or "Security
Warning" may appear as you click Object detection.
For details, see "Installing ActiveX Control" in
"When using Windows XP Service Pack 2" on
page 10 or "Installing ActiveX Control" in "When
using Windows Vista" on page 12.

Common Tab

Use this tab to select moving object detection or
unattended object detection, and set the conditions for
detection while observing a camera image. You can
perform the settings for each of up to 16 preset positions
and the current position.
This is the same menu as that displayed when you click
Detection on Alarm sending of the e-Mail (SMTP)
menu, or on Alarm recording of the Image memory
menu.
Mode setting section
Moving object detection setting section
Unattended object detection setting section
Mode setting section

PTZ position

Select whether object detection is performed under the
individual conditions for each preset position or always
under the same conditions.
Current position: Regardless of the camera position,
object detection always works under the same
conditions.
Preset position: You can set object detection for each
preset position. When Preset position is selected, an
object will not be detected if the camera is not
directed to the preset position.
Position setting section