Day/Night Tab; Privacy Masking Tab - Sony SNC-VB635 User Manual

Day/Night Tab

Use this tab to set the day/night function of the camera.
Day/Night
Mode
Select the day/night mode. This function has the
following modes.
Auto: Normally works in day mode; switches
automatically to night mode in a dark place.
Threshold
Set the brightness level when the night mode is set.
Hold time
Set the reaction time of changes in brightness.
Manual: Switch the day/night mode manually.
When the checkbox of the night mode is selected, the
camera works in night mode. Otherwise, the camera
works in day mode.
Timer: Normally the camera works in day mode. It
switches to night mode at the time you set in Timer
of Day/Night in the Schedule menu.
Sensor input: Controls the day/night mode by
synchronizing it with the sensor input.
Select the synchronized sensor from Sensor input 1
and Sensor input 2. While a sensor input is detected,
the camera works in night mode.
Status
Displays the day/night function status.
OK/Cancel
See "Buttons common to every menu" on page 18.

Privacy masking Tab

Using the privacy masking enables you to hide images
by masking specified parts of the images when
streaming.
Note
Perform the following before setting the privacy
masking.
• Set Image size1 in the Video codec tab of the Video /
Audio menu or Video menu to the maximum rate.
• Deselect the checkbox of Image 1 in the PTZ control
tab of the PTZ control menu.
• Deselect the checkbox of Stabilizer in the Installation
tab of the System menu. After setting the privacy
masking, set the Stabilizer function again.
26
Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu
Preview screen
This screen is for monitoring images and configuring
privacy masking.
You can move the position of the privacy mask displayed
on the preview screen by drag and drop.
Effect
Set the effect of privacy masks.
Color
Specify the color of privacy masks. This setting is
common to every privacy mask.
Position
Select the number corresponding to the display position
on the preview screen.
After completing the configuration, register by clicking
OK.
Clear
Click the button to delete the privacy mask set in
Position.
Clear all
Click the button to delete all privacy mask.
Setting a privacy mask
Operate according to the following procedure to set a
privacy mask in the position of your choice:
1
Select the number to register from the Position
drop-down list.
2
Specify the privacy mask area by dragging the
mouse on the preview screen.
3
Select the effect and color of the mask from the
Effect and Color drop-down list.
Note
The color is common to every privacy mask. The
color selected last is applied.
4
Click OK.
The mask is displayed on the preview screen.
OK/Cancel
See "Buttons common to every menu" on page 18.