Table Of Contents - Kodak ScanMate i900 Series Scanning Setup Manual

Scanning Setup Guide for the ISIS Driver
Contents
A-61734 March 2012
Scan Validation Tool dialog box ......................................................... 2
Configuring Image settings ................................................................ 4
Main tab ......................................................................................... 6
Layout tab ...................................................................................... 8
Scan Area dialog box..................................................................... 9
Image Processing tab .................................................................. 10
Dropout tab .................................................................................. 12
Adjustments tab ........................................................................... 13
Image Edge Fill tab...................................................................... 15
Blank Image Detection tab........................................................... 16
Configuring Scanner settings........................................................... 17
Scanner tab ................................................................................. 18
Multifeed Detection tab ................................................................ 19
About tab ..................................................................................... 20
The Kodak ScanMate i900 Series Scanners provide the ability to
process scanned images to improve their quality by using image
processing features.
Image processing refers to features of the scanner that allow you to
automatically adjust each image that may improve the resulting images
(i.e., correcting any skew in the fed document, cutting the edges of the
image off to remove unneeded borders or cleaning up extraneous
"noise" on the image).
The information in this guide provides procedures for using the ISIS
Driver as well as descriptions of the features. The same features should
be available on the user interface of the scanning application you are
using.
1