Rear Panel; Figure 1-3. Gpib-232Cv-A Rear Panel - National Instruments GPIB-232CV-A User Manual

Rear Panel

CONFIG
GPIB ADDRESS
© National Instruments Corporation
LED
BUSY
FULL
The configuration switches are located on the rear panel of the
GPIB-232CV-A. The power switch of the DC version is also located on the
rear panel.
Figure 1-3 shows the rear panel of the GPIB-232CV-A.
MODE
O
N
1 2 3 4 5 6 7 8
Table 1-1. LED Descriptions (Continued)
Indicates that the GPIB-232CV-A is currently
accepting serial data. Each serial character received
toggles the status of the BUSY LED.
Indicates that one of the GPIB-232CV-A data buffers
is full. This is not an error condition, but is merely a
signal that bus performance may be reduced to the
speed of the slower port.
O
N
1 2 3 4 5 6 7 8

Figure 1-3. GPIB-232CV-A Rear Panel

1-5
Chapter 1
Indication
BAUD RATE
DATA FORMAT
HANDSHAKE
GPIB-232CV-A User Manual
Introduction