Table of Contents
Advertisement
Chapter 1
Introduction
Top Panel
GPIB-232CV-A User Manual
The six light-emitting diodes (LEDs) are located on the GPIB-232CV-A
top panel. Figure 1-2 shows the top panel.
GPIB-232CV-A
RS-232
IEEE 488 Converter
Figure 1-2. GPIB-232CV-A Top Panel
The LEDs show the current status of the GPIB-232CV-A. Table 1-1
describes each LED.
LED
POWER
Indicates that power has been applied to the unit and
the ON/OFF switch is in the ON position.
READY
Indicates that the power-on self-test has successfully
passed and the unit is ready to operate.
TALK
Indicates that the GPIB-232CV-A is configured as a
GPIB Talker.
LISTEN
Indicates that the GPIB-232CV-A is configured as a
GPIB Listener.
Table 1-1. LED Descriptions
Indication
1-4
www.ni.com
Advertisement
Table of Contents
