Configuring Local Service Control; Figure 5-29 Local Service Control - Zte ZXHN H168N Maintenance Management Manual

ZXHN H168N Maintenance Management Manual
Parameter
Egress
9. Click Apply button to apply the changes.
– End of Steps –

5.4.3 Configuring Local Service Control

The section describes how to configurate local service control.
Steps
1. On the main page of the ZXHN H168N, select Internet > Security > Local Service
Control to go to the Local Service Control page, as shown in

Figure 5-29 Local Service Control

Local Service Control-IPv4
2. Configuring Local Service Control-IPv4 parameters.
Table 5-12
SJ-20140220172310-002|2014-03-03 (R1.0)
lists the Local Service Control-IPv4 parameters.
5-28
Description
Specify the data traffic direction. The Ingress option and
Egress option cannot be the same.
l
If the Ingress is LAN, the Egress should be a WAN or
3G connection. The data traffic direction is upstream.
l If the Ingress is a WAN or 3G connection, the Egress
should be the LAN. The data traffic direction is
downstream.
ZTE Proprietary and Confidential
Figure 5-29.