Configuring Service Control; Url Filter Parameter - Zte ZXHN H108N Maintenance Management Manual

Steps
1. On the navigation tree, click [Security→ URL Filter]. The
displayed, see Figure
users to access the specified URL addresses.
Figure 38 URL Filter
Table 27 lists the parameters for
Table 27 URL Filter Parameter
Parameter
Enable
Mode
URL Address
2. Specify the URL and other parameters, and then click Add.
The URL filter is configured.
Users are permitted or denied to access the specified URL addresses.

7.5 Configuring Service Control

This procedure introduces how to permit or discard the specified inbound access services by
configuring the source IP address range and service type.
Context
By default, you cannot access the device through the
38. On this page, you can specify the URL rules to permit or deny the
URL filter configuration.
Description
Enable the URL filter function
There are two modes: Discard and Permit.
Discard: Deny the users to access the specified URL ad-
dresses.
Permit: Permit the users to access the specified URL ad-
dresses.
The URL address that is allowed to be accessed or denied
URL
WAN interface by
57
filter configuration page is
FTP or web site.