Main Circuit Cable Size And Tightening Torque - LiteOn EVO6000 Series Quick Start Manual

Follow the instructions below to remove the jumper if an even lower current leakage to a

even lower level.
Removing the jumper may increase the signal interference.

1. Front right corner of the machine, remove the screw using a screwdriver.
2. Remove the top right corner of the right side of the ground blade screw and save.

4.2.3 Main Circuit Cable Size and Tightening Torque

Select the cables and crimp terminals according to Table 4.2.2.
1. The recommended cables(
continuous temperature tolerance up to 75°C with ambient temperature tolerance up to 40 °C
and wiring distance up to 100 meters.
) are 600 V vinyl-sheathed cables which has
copper conductors
23