Figure 3 Terminal Connectivity - VeriFone Vx 570 Training Manual

If the document printer switch is not turned on or the printer cable is not
connected, the VeriFone terminal will display:
Printer Not Connected
Please Attach
Serial Cable
Connection (RS232)
Terminals that have a full time broadband connection (high speed Internet; DSL, cable modem,
etc.) will connect one end of the Ethernet cable to the port labeled 10BaseT and the other end
to the Ethernet source connection (may require a router) (See Figure 3). All broadband
connections should also have a dialup connection in the event the broadband connection is
interrupted. For dialup connections, attach one end of the telephone cord to the communication
port (Dialup) of the VeriFone terminal and the other end to the telephone wall jack. The power
source is found on the right side of the terminal (See Figure 4).
VeriFone Vx 570 Training Manual
1/27/2012

Figure 3 Terminal Connectivity

Figure 4 Power Source
Dialup Connection
Ethernet
Connection
(10BaseT)
Power
Source
5