Sennheiser AMBEO Instruction Manual page 50

Specifications
50 | AMBEO Soundbar
Inputs/outputs
HDMI TV (eARC) OUT
HDMI 1 IN
HDMI 2 IN
HDMI 3 IN
OPT IN
AUX IN
USB
ETHERNET
Subwoofer SW Pre-OUT
Microphone input for room
calibration
SB01-RC remote control
Transmission
Range
Power supply
WiFi
Standard
Transmission system
Transmission frequency
(country-specific)
Modulation 2.4 GHz band
Modulation 5 GHz band
Output power
default: HDMI 2.0a, eARC (HDMI 2.1)
control: CEC
video formats: up to 4K (60 Hz),
Full HD, MHL 2.1
Encoding: HDCP 1.4
Power supply for accessories
(external devices): 5 V
default: HDMI 2.0a
encoding: HDCP 2.2
control: CEC
video formats: up to 4K (60 Hz),
Full HD, MHL 2.1
HDR formats: Dolby Vision Pass-
Through
S/PDIF
Supported sampling rates: up to
192 kHz
stereo RCA sockets
USB socket (type A), for power supply
for accessories (external devices): 5 V
⎓
, 1 A; service socket for updates
RJ-45 socket, 100/10 MBit
mono RCA, max. 2 V
2.5 mm jack socket, mono
infra-red
approx. 8 m
coin cell, type CR2032, 3 V
IEEE 802.11 a/b/g/n/ac
2 x 2 MIMO
2,400 MHz to 2,483.5 MHz
5,170 MHz to 5,835 MHz
CCK, DQPSK, DBPSK für DSSS
64QAM, 16QAM, QPSK, BPSK for
OFDM
64QAM, 16QAM, QPSK, BPSK
100 mW (max)
⎓
, 1 A