Using The Ambeo Soundbar - Sennheiser AMBEO Instruction Manual

Using the AMBEO Soundbar

32 | AMBEO Soundbar
Using the AMBEO Soundbar
Switching the AMBEO Soundbar on
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷
Adjust the volume to a low level before selecting a
source.
▷
Do not continuously expose yourself to high volume lev-
els.
If you want to switch the Soundbar on, you have the following
options:
• Press the on/off button on the Soundbar.
• Press the on/off button on the remote control.
• Press the on/off button on the TV remote control (if the TV is con-
nected to the Soundbar via HMDI CEC).
• Use the Smart Control app.
If the Soundbar is inactive for 20 minutes (default setting), it
automatically switches to standby,
Switching the AMBEO Soundbar off
(standby)
If you want to switch the Soundbar off (standby), you have the follow-
ing options:
• Press the on/off button
• Press the on/off button
• Press the on/off button on the TV remote control (if the TV is con-
nected to the Soundbar via HMDI CEC).
• Use the Smart Control app.
The status LED lights up red.
To completely disconnect the Soundbar from the power supply sys-
tem, > 27.
ECO standby mode
The Soundbar has an ECO standby mode. You can set the mode via
the Smart Control app. Booting the Soundbar takes longer when ECO
standby mode is activated.
• ECO standby mode is activated: Booting takes approx. 20 sec-
onds. The power consumption of the Soundbar is approx. 1.9 W
(activated upon delivery).
• ECO standby mode is deactivated: Booting takes approx. 1 sec-
onds. The power consumption of the Soundbar is approx. 5.5 W.
> 33.
on the Soundbar.
on the remote control.