Sennheiser AMBEO Instruction Manual page 37

▷
From the list of found Bluetooth devices, select "AMBEO Sound-
bar". If necessary, enter the default pin code "0000".
If pairing was successful, the
If no connection is established within 3 minutes, pairing mode
is terminated. If necessary, start the pairing mode again.
ON
The device name of the Soundbar can be changed in the Chromecast
app (e.g. "Soundbar family room").
Disconnecting the AMBEO Soundbar from a Bluetooth device
▷
Via the menu of your Bluetooth device, disconnect the connection
to the Soundbar.
The Soundbar is disconnected from the Bluetooth device. The
display shows "Disconnected". The
Pairing the AMBEO Soundbar with an NFC device (NFC pairing)
▷
Activate Bluetooth and NFC on your Bluetooth device.
▷
Place your NFC device close (less than 3 cm) to the
on the Soundbar.
The status LED pulses blue. The devices are being paired.
If pairing was successful, the
Using the AMBEO Soundbar
status LED lights up blue.
< 20 cm
Pairing
Connected
Stan's iPhone
status LED
status LED lights up blue.
AMBEO Soundbar | 37
Hold
2s
goes off.
NFC antenna