Crestron 4K DigitalMedia 3-Series Supplemental Manual
Presentation system 150
Hide thumbs
Also See for 4K DigitalMedia 3-Series:
- Operation manual (62 pages) ,
- Quick start manual (8 pages) ,
- Do manual (2 pages)
Related Manuals for Crestron 4K DigitalMedia 3-Series
Summary of Contents for Crestron 4K DigitalMedia 3-Series
- Page 1 DMPS3-4K-150-C 3-Series 4K DigitalMedia™ Presentation ® System 150 Supplemental Guide Crestron Electronics, Inc.
- Page 2 Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
-
Page 3: Table Of Contents
Contents Introduction Physical Description Front Panel......................2 Rear Panel ......................3 .AV Framework Technology Crestron Connect It Functionality Integrated 3-Series Control System Configuration Adjustable Underscan ..................... 6 Configuration Using the Web Interface ............6 Configuration Using SIMPL Windows ............7 User-Selectable Output Resolution ................. -
Page 5: Introduction
.AV Framework™ technology. This guide provides information about the following: • Physical description of the front and rear panels of the DMPS3-4K-150-C • .AV Framework technology, Crestron Connect It functionality, and 3-Series Control System integration supported by the DMPS3-4K-150-C ® •... -
Page 6: Physical Description
IR IN: Infrared sensor; IR Frequency: 36 to 38 kHz; IR Formats: Crestron format, RC5; Allows control from IR wireless remotes using the Crestron or RC-5 command sets AUTO INPUT SELECT: Push button and bicolor green/amber LED, selects automatic switching mode VGA INPUT SELECT 1-4: Push buttons for manual input selection and corresponding ... -
Page 7: Rear Panel
Rear Panel The following illustration shows the rear panel of the DMPS3-4K-150-C. DMPS3-4K-150-C Rear Panel VGA IN 1-4: HD15 female; Analog VGA/RGB/video inputs; Signal Types: VGA, RGB, component, S-video, or composite; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC or PAL;... - Page 8 PoDM PSE (Power Sourcing Equipment) ports HDBaseT PoE compatible); Each connects to the DM 8G+ output of a DigitalMedia transmitter or other DM device or to an HDBaseT device via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable; Green LED indicates DM link status;...
-
Page 9: Av Framework Technology
Crestron Connect It Functionality The DMPS3-4K-150-C provides built-in Crestron Connect It functionality, allowing USB connections of up to four TT-100 series Crestron Connect It cable caddies (sold separately). The auto-switching inputs of the DMPS3-4K-150-C support individual HDMI, VGA, and analog audio connections at each cable caddy. -
Page 10: Configuration
Configuration In addition to the .AV Framework setup and management tool, the DMPS3-4K-150-C can be configured using the web interface, which can be accessed from a web browser by entering the IP address or hostname of the DMPS3-4K-150-C. SIMPL Windows can also be used to configure the DMPS3-4K-150-C. -
Page 11: Configuration Using Simpl Windows
Configuration Using SIMPL Windows Using SIMPL Windows, adjust underscan in subslot 02 of the Outputs slot for the DMPS3-4K-150-C. Set the <Scaler_Underscan_Mode> analog input join to the desired value. NOTE: For detailed information, refer to the SIMPL Windows help file. User-Selectable Output Resolution The output resolution of the scaler is user selectable. -
Page 12: Standby Timeout
Standby Timeout Standby timeout sets the period of time after which the output will shut down if no video is detected on the input. To configure Standby Timeout settings, use the web interface or SIMPL Windows as discussed in the following sections. Configuration Using the Web Interface An overview of the steps necessary to configure the Standby Timeout setting is as follows: NOTE:... -
Page 13: Display Mode
Display Mode The display mode of an image can be set to one of the following: • Maintain aspect ratio • Stretch to fit • 1:1 pixel mapping • Zoom To configure Display Mode settings, use the web interface or SIMPL Windows as discussed in the following sections. -
Page 14: Edid
EDID EDID (Extended Display Identification Data) configuration allows management of the EDID that is to be sent to the upstream device connected to a VGA, HDMI, or DM 8G+ input of the DMPS3-4K-150-C. If an EDID other than the default EDID is desired, use the web interface to configure the EDID. -
Page 15: Adding A Third-Party Hdbaset Transmitter
Adding a Third-Party HDBaseT Transmitter In the Configure View of SIMPL Windows, add a third-party HDBaseT transmitter to the DMPS3-4K-150-C by doing the following: 1. Follow the menu path: Slot:8:DMPS3 Control >> Slot:2:AV Control >> Slot:2:Inputs >> Slot:9:DM Input 1 or Slot:10:DM Input 2 2. - Page 16 Addition of HDBaseT Receiver 12 • DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System Supplemental Guide – DOC. 7724A...
-
Page 17: Troubleshooting
NOTE: If, for any reason, the factory default settings of the DMPS3-4K-150-C must be restored, do the following: From the Tools menu in the Crestron Toolbox application, select Text Console and enter the following command: restore DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System • 13... -
Page 18: Appendix: Pin Assignments
Appendix: Pin Assignments This section provides information about pin assignments and wiring for the following DMPS3-4K-150-C connectors: • VGA IN • DM IN and DM OUT • AUDIO OUT • VGA IN Pin Assignments Pin 5 Pin 1 NUMBER YPbPr S-Video Composite Pin 10... - Page 19 AUDIO OUT Pin Assignments and Wiring SIGNAL BALANCED UNBALANCED NAME AUDIO OUTPUT AUDIO OUTPUT L+ Out + – – – L– Open Shield/Ground Common Ground R+ Out – R– Open Balanced Output Unbalanced Output Shield Right Right Left Left LAN Pin Assignments NUMBER SIGNAL NUMBER SIGNAL Pin 8...
- Page 20 Crestron Electronics, Inc. Supplemental Guide – DOC. 7724A 15 Volvo Drive Rockleigh, NJ 07647 (2047535) Tel: 888.CRESTRON 11.16 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.