Samsung DW80M9 Series Service Manual page 29

Part
Thermistor
②
Figure
Preparation :
•
•
•
①
•
•
1. Remove the two (2) screw using screw driver which
2. Disconnect the wire Terminal connected to the
3. Pull it out.
Description
Make sure to disconnect the power, water supply.
Remove the Upper & Lower, 3rd baskets in the
dishwasher.
Pull out the dishwasher then lay the dishwasher
down on its back.
Remove the Assy cover base.
- Refer to the "Assy cover base" disassembly
section to separate Assy cover base until step 2.
Remove Assy cover PCB.
- Refer to the "Main PBA" disassembly section to
separate Assy cover PCB until step 2.
has long tip through the hole on frame front.
thermistor.
Disassembly and Reassembly _ 27