Samsung DW80M9 Series Service Manual page 20

Part
Assy Case Brake
1. Drain hose
2. Drain pump out
Assy guide water-
sub
18 _ Disassembly and Reassembly
Figure
4. Separate connection parts in red circle from tub and
4. Loosen the three (3) clamps and release the three
3. Assy guide
water-sub
Clamp
Preparation:
•
1. Separate the Assy guide water-sub from base by
2. Separate the Assy guide water-sub from connected
Description
pull out the Case brake by lifting up the hook in red
square.
(3) hoses from the Assy case brake.
Caution
Water remaining in the Assy case sensor and Assy
case break will come out. Lay a towel on the floor to
absorb any water that may come out.
When reassembling, the holder of the clamp must be
pointing toward the inside of the dishwasher.
Disassemble the Assy Case Brake.
- Refer to the "Assy Case Brake" disassembly
section to separate Assy case brake until step 4.
bending two fixed hook.
hose by disassembling the clamp.