Samsung DW80M9 Series Service Manual page 17

Part
Lever door
Assy cover door
switch
Assy condenser
Figure
3 2 1 2 3
Assy condenser
Assy auto
door switch
Lever door
Description
1. Remove the two(2) screws holding the trim-
up to the assy-tub.
2. Check and separate 2 hook of trim.
3. Separate two wire connector.
4. If you want to separate the Lever door from
Assy tub, remove the screw labelled ① in the
picture to the left.
If you want to separate Assy auto door switch
from Assy tub, remove the screws labelled ②
on the picture to the left.
If you want to separate Assy condenser from
Assy tub, remove the screws labelled ③ in the
picture on the left.
5. Refer to the picture on the left to remove the
parts.
Disassembly and Reassembly _ 15