Samsung DW80M9 Series Service Manual page 22

Part
Assy duct main
Assy Rail
20 _ Disassembly and Reassembly
Figure
Assy duct main
Description
Preparation:
• Make sure to disconnect the power, water supply,
and drain hose connection and remove the water in
each nozzle.
• Remove the upper, lower baskets and 3rd rack in the
dish washer.
• Pull out the dishwasher carefully.
1. Use a flat tip screw driver to gently pry the stainless
steel tabs that secure the Assy duct main to the tub.
Refer to the arrows in the picture on the left.
2. Separate the duct while making sure not to damage
the connection point marked in the red circle.
Preparation:
Disasssemble the Assy duct main.
- Refer to the "Assy duct main" disassembly section
to separate Assy duct main.
1. Remove the cover distributor like the picture to the
left.
Check and separate the hook on both sides of the
front part of Cover distributor & the rear part of
Cover distributor.
2. Remove the screw in red circle in the picture.
3. If you move assy rail up follow following the yellow
arrows while holding a fixed part in red circle, assy
rail separates.