Samsung DW80M9 Series Service Manual page 28

Part
Case gear
&
Foot
&
Gear worm
&
Gear helical
&
Shaft rod adjuster
foot
26 _ Disassembly and Reassembly
Figure
Preparation:
•
•
•
•
1. Remove the screw which is holding the case gear to
2. By disconnecting the hook in red box using the flat
3. By disconnecting the hook in red box using the flat
Description
Make sure to disconnect the power, water supply,
and drain hose connections.
Remove the upper & lower baskets in the
dishwasher.
Pull out the dishwasher & lay the dishwasher down
on its back.
Remove the Assy cover base.
- Refer to the "Assy cover base" disassembly
section to separate Assy cover base until step 2.
the base.
screw driver, Remove the Case gear.
screw driver, Disassemble the shaft rod adjuster foot
and Gear worm from Base.