70
3-1. Basic operation
Map screen operation
Current position display
1
Press the "MAP" button.
2
Check that the current posi-
tion map is displayed.
To correct the current posi-
tion manually: P.105
●
While driving, the current position
mark is fixed on the screen and
the map moves.
●
The current position is automati-
cally set as the vehicle receives
signals from the GPS (Global
Positioning System). If the current
position is not correct, it is auto-
matically corrected after the vehi-
cle receives signals from the GPS.
●
After the 12-volt battery discon-
nection, or on a new vehicle, the
current position may not be cor-
rect. As soon as the navigation
system receives signals from the
GPS, the correct current position
is displayed.
Map scale
1
Select
or
the scale of the map screen.
●
The scale indicator bar appears at
the bottom of the screen.
●
Select and hold
tinue changing the scale of the
map screen.
●
The scale of the map screen can
also be changed by selecting the
scale bar directly. This function is
not available while driving.
●
Pinch outward on the screen to
zoom in and pinch inward to zoom
out.
●
In areas where a micro city map is
available,
will change to
when the map screen is set
to the smallest scale.
Micro city map
For areas covered by the micro
city map (some major cities), a
micro city map on a scale of 75
ft. (25 m) can be selected.
When the map is scaled down to
150 ft. (50 m),
and can be selected to
display the micro city map.
to change
or
to con-
changes to