Function - Toyota RAV4 2019 Owner's Manual

7-1. Phone operation (Hands-free system for cellular phones)
● Depending on the type of Blue-
®
tooth phone used for receiving
messages, or its registration sta-
tus with the system, some infor-
mation may not be displayed.
● The pop-up screen is separately
available for incoming e-mail and
SMS/MMS messages under the
following conditions:
E-mail:
• "Incoming E-mail Display" is set to
"Full Screen". (P.189)
• "E-mail Notification Pop-up" is set
to on. (P.189)
SMS/MMS:
• "Incoming SMS/MMS Display" is
set to "Full Screen". (P.189)
• "SMS/MMS Notification Pop-up" is
set to on. (P.189)
● Depending on the type of Blue-
®
tooth phone being connected, E-
Mail function cannot be used via
®
Bluetooth .
Checking received mes-
sages
1
Display the message screen.
(P.184)
2
Select a desired account
name.
3
Select the desired message
from the list.
4
Check that the message is
displayed.
Select to call the message
A
sender.
Select to have messages
B
read out.
To cancel this function, select
"Stop".
When "Automatic Message
Readout" is set to on, mes-
sages will be automatically
read out. (P.196)
Select to display the previous
C
or next message.
This function can be chosen
D
the method to reply mes-
sage with "Dictation" or
"Quick Message".
● Reading a text message is not
available while driving.
● Depending on the type of Blue-
®
tooth phone being connected,
this function cannot be used.
● Depending on the type of Blue-
®
tooth phone being connected, it
may be necessary to perform
additional steps on the phone.
● Messages are displayed in the
appropriate connected Blue-
®
tooth phone's registered mail
address folder. Select the desired
folder to be displayed.
● Only received messages on the
connected Bluetooth
be displayed.
● The text of the message is not dis-
played while driving.
● Turn the "POWER VOLUME"
knob, or use the volume control
switch on the steering wheel to
adjust the message read out vol-
ume.
● "Subject:" field is not shown on
185
®
phone can
7