2-2. Connectivity Settings - Toyota RAV4 2019 Owner's Manual

screen. (P.38)
6
Register the Bluetooth
device using your Blue-
®
tooth device.
 For details about operating
the Bluetooth
the manual that comes with it.
 A PIN code is not required for
SSP (Secure Simple Pairing)
compatible Bluetooth
devices. Depending on the
type of Bluetooth
being connected, a message
confirming registration may
be displayed on the Blue-
®
tooth device's screen.
Respond and operate the
®
Bluetooth device according
to the confirmation message.
7
Check that the following
screen is displayed, indicat-
ing pairing was successful (a
®
Bluetooth link has been
®
®
device, see
®
®
device

2-2. Connectivity settings

established but registration is
not yet complete).
 The system is connecting to
the registered device.
 At this stage, the Bluetooth
functions are not yet avail-
able.
8
Check that "Connected" is
displayed and registration is
complete.
 If an error message is dis-
played, follow the guidance
on the screen to try again.
● If a cellular phone does not oper-
ate properly after being con-
nected, turn the cellular phone off
and on and then connect it again.
37
2
®