Voice Command System Operation - Toyota RAV4 2019 Owner's Manual

NOTICE
● Do not touch and put a sharp
object to the microphone. It may
cause failure.
Voice command system
operation
The voice command system is
operated by saying commands
which correspond to a sup-
ported function. To display
examples of commands for sup-
ported functions, select a func-
tion button on the screen after
starting the voice command sys-
tem.
Operation from the main
menu
1
Press the talk switch.
 Voice guidance for the voice
command system can be
skipped by pressing the talk
switch.
2
If "Getting Started with Voice"
screen is displayed, select
"OK" or press the talk switch.
(P.158)

5-1. Voice command system operation

3
 To display sample commands
of the desired function, say
the desired function or select
the desired function button. To
display more commands,
select "More Commands".
 Selecting "Help" or saying
"Help" prompts the voice com-
mand system to offer exam-
ples of commands and
operation methods.
 Registered POIs, registered
names in the contacts list etc.,
can be said in the place of the
"<>" next to the commands.
(P.160)
For example: Say "Find a restau-
rant", "Call John Smith" etc.
 If a desired outcome is not
shown, or if no selections are
available, perform one of the
following to return to the pre-
vious screen:
• Say "Go back".
• Select
 To cancel voice recognition,
select
press and hold the talk switch.
 To perform the voice com-
mand operation again, select
"Start Over" or say "Start
over".
 To suspend voice command
operation, select "Pause" or
say "Pause". To resume the
After hearing a beep, say a
supported command.
.
, say "Cancel", or
157
5