Toyota RAV4 2019 Owner's Manual page 102

102
3-4. Setup
Registering areas to avoid
1
Select "New".
2
Select the desired item to
search for the location.
(P.80)
3
Select either
change the size of the area to
be avoided and select "OK".
4
Select "OK" when the area to
avoid screen appears.
● If a destination is entered in the
area to avoid or the route calcula-
tion cannot be made without run-
ning through the area to avoid, a
route passing through the area to
be avoided may be shown.
● Up to 10 locations can be regis-
tered as points/areas to avoid.
Editing areas to avoid
The name, location and/or area
size of a registered area can be
edited.
1
Select "Edit".
2
Select the desired area.
or to
3
Select the desired item to be
edited.
Select to edit the name of the
A
area to avoid. (P.102)
Select to set display of the
B
area to avoid name on/off.
Select to edit area location.
C
(P.102)
Select to edit area size.
D
(P.102)
Select to set the area to
E
avoid function on/off.
4
Select "OK".
Changing the name
1
Select "Name".
2
Enter a name and select
"OK".
Changing the location
1
Select "Location".
2
Scroll the map to the desired
point (P.72) and select
"OK".
Changing the area size
1
Select "Size".