Table of Contents
Advertisement
Actiontec Wireless Cable/DSL Router User Manual
Windows 2000
1. Click Start, Programs, Accessories, Command Prompt.
2. When the "Command Prompt" window appears, enter:
then press Enter on the keyboard.
3
A list of information about the Ethernet adapter appears.
4. Note the "Physical Address," which is the
Ethernet adapter.
Windows NT 4.0
1. Click Start, Programs, Command Prompt.
2. When the "Command Prompt" window appears, enter:
then press Enter on the keyboard.
3
A list of information about the Ethernet adapter appears.
4. Note the "Physical Address," which is the
Ethernet adapter.
Macintosh
1. Select Apple, Control Panels,
2. In the "
" window, click Info.
TCP/IP
3. The "
Info" window appears. In the "Addresses" section, note the
TCP/IP
"Hardware address," which is the
adapter.
ipconfig /all
ipconfig /all
TCP/IP
MAC
74
address of the installed
MAC
address of the installed
MAC
.
address of the installed Ethernet
Advertisement
Table of Contents
