Table of Contents
Advertisement
18. Restart the computer. After the computer restarts, verify the settings. Click
Start, Programs and Command Prompt. At the command prompt, enter:
Verify an IP address was received, then close the window.
Windows 2000
Windows 2000 installs with default
with Windows 2000 installed, or Windows 2000 has just been installed on the com-
puter, connect the computer to the Router. No further configuration is necessary.
If the Windows 2000
installation, the
TCP/IP
Windows 2000 installation disks or CD-ROM is available before beginning, since
some driver information may need to be copied during the configuration process.
If the installed Ethernet adapter was supplied with a driver diskette, it should be
available as well.
Note: When installing any software, consult the user guide and
help files supplied with the software for detailed information.
Actiontec provides the following information as a guideline only.
To configure Windows 2000
1. Click Start, Settings and Control Panel.
2. When the "Control Panel" window appears, double-click Network and Dial-
Up Connections.
Appendix B Configuring TCP/iP
ipconfig /all
TCP/IP
settings on the computer have been changed since
TCP/IP
settings must be configured. If this is the case, ensure the
settings:
TCP/IP
57
configuration. If the computer is new
Advertisement
Table of Contents
