ActionTec GE344000-01 User Manual page 23

Actiontec Wireless Cable/DSL Router User Manual
Actiontec strongly recommends leaving the
Server option is Off, ensure the
the same subnet as the
Server Configuration."
DHCP Server Configuration
Clicking Next in the "
Configuration" screen. Change
Beginning Address - the
IP
starts assigning
factory default setting (192.168.0.2).
Ending Address - the
IP
assigning
IP
ry default settings (192.168.0.254).
The beginning and ending
Router. If the default values are left intact, the Router supplies a unique IP
address between 192.168.0.2 and 192.168.0.254 to each computer on the net-
work. Note that the first three groups of numbers of the addresses are identical;
this means they are on the same subnet. The
on the same subnet as the
Router's address is changed to 10.33.222.1, set the beginning
IP
10.33.222.2, and the ending
(Dynamic or Static) - the type of
DNS
Internet Service Provider (
information, select the type here. If not, leave as is.
addresses of the networked computers are on
IP
address of the Router. For more information, see "
IP
Server" screen generates the "
DHCP
address range and
IP
address at which the
IP
addresses. Actiontec recommends keeping the
IP
Address at which the
IP
addresses. Actiontec recommends keeping the facto-
addresses define the
IP
address range it generates. For instance, if the
IP
address to 10.33.222.254.
IP
. If the
ISP)
20
Server option On. If the
DHCP
DHCP
server information here.
DNS
DHCP
Server stops
DHCP
address range of the
IP
address of the Router must be
IP
server provided by the
DNS
provided
ISP DNS
DHCP
DHCP
Server
server
address to
IP
server