Connecting The Router; Ethernet Connection - ActionTec GE344000-01 User Manual

Connecting
the Router
The Router can be physically connected to the computers in two ways: by Ethernet
cable, or cable, as well as wirelessly. Select the type of connection and follow
USB
the instructions.

Ethernet Connection

1. Start up the computer.
2. Plug one end of the red cable (included with the Router) to the port labeled
" " on the back of the Router. Connect the other end to the Ethernet port
LAN
on the computer.
3. Plug the Router's power supply into a wall outlet, and then plug the other end
in the port labeled "Power" on the back of the Router. The Router is now con-
nected to the computer with an Ethernet cable.
R e se t
L
C a b le /D S
L A N
Ethernet Cable
(to Computer)
5
P o w e r
U S B
Ethernet Cable
(to Cable/DSL
Modem)
2
Power Cord
(to Power
Outlet)