Hardware Monitor Menu - Siemens Simatic IPC527G Operating Instructions Manual

7.6.4

Hardware Monitor menu

Hardware Monitor menu
The Hardware Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
System Function description
parameters
CPU / Sys- The onboard hardware monitor automatically detects and dis-
tem Tem- plays the CPU / system temperatures. Select [Ignore] if you do
perature not need to display the detected temperature, select [Ignore] .
CPU / CHA The onboard hardware monitor automatically detects and dis-
Fan Speed plays the CPU / chassis fan speeds in rotations per minute
(RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select [Ignore] if you do not need to display the de-
tected speed.
CPU The onboard hardware monitor automatically detects the voltage
VCORE, output through the onboard voltage regulators. Select [Ignore] if
+3.3V, +5V, you do not want to detect this item.
+12V
CPU Fan Control the CPU fan.
Control
[Disabled Mode]: The CPU fan runs at full speed.
•
[Auto Mode]: The CPU fan speed changes automatically
•
according to the CPU temperature.
CHA Fan1 Control the chassis fan.
Control
[Auto Mode]: The chassis fan speed changes automatically
•
according to the motherboard temperature.
[Silent Mode]: The chassis fan runs at low speed with less
•
noise.
[Disabled Mode]: The chassis fan runs at full speed.
•
SIMATIC IPC527G
Operating Instructions, 03/2019, A5E45491226-AA
Technical specifications
7.6 BIOS description
Configuration Default setting
options
[xxxºC/xxxºF]
[xxxºC/xxxºF]
•
[Ignore]
•
[N/A]
[xxxx RPM]
•
[Ignore]
•
[N/A]
•
[Actual Value] [Actual Value]
•
[Auto Mode]
[Disabled
•
Mode]
[Auto Mode]
•
[Auto Mode]
[Auto Mode]
•
[Silent Mode]
•
[Disabled
•
Mode]
87