Installing And Removing Hardware; Replacing The Device Fan - Siemens Simatic IPC527G Operating Instructions Manual

Maintaining and repairing the device

6.3 Installing and removing hardware

Limitation of liability
All technical specifications and approvals of the device only apply if you use expansion
components that have a valid CE approval (CE mark). The installation instructions for
expansion components in the associated documentation must be observed.
UL approval of the device only applies when the UL-approved components are used
according to their "Conditions of Acceptability".
We are not liable for functional limitations caused by the use of third-party devices or
components.
Tools
Tools to open the device, see section "Open the device (Page 36)". You can make repairs
on the device with the following tools:
● T20 screwdriver for function earth connection
● PH2 screwdriver for all of the remaining screws
6.3 Installing and removing hardware
6.3.1

Replacing the device fan

Requirement
● The device is opened.
● A PH2 screwdriver
46
Operating Instructions, 03/2019, A5E45491226-AA
SIMATIC IPC527G