Setting Up The Communications Parameters - Siemens Simatic S7-200 CPU 210 System Manual

Installing and Using the STEP 7-Micro/WIN Version 2.0 Software

Setting Up the Communications Parameters

Figure 2-2 shows the Setup Communications dialog box. The first two port options are for PC
communication ports. The address for the PDS 210 is 2 and cannot be changed. To set up
the communication parameters, follow these steps:
1. Select the menu command Setup
2. Verify that the information in the dialog box is correct for your configuration. Remember
that the CPU address for the PDS 210 is always 2, and that the baud rate is always
9600.
3. Confirm your selections by clicking the "OK" button.
Project Edit View CPU Debug Tools Setup Window Help
Figure 2-2 Setting Up Communications with the PDS 210
2-4
Communications...
Setup
Preferences...
Communications...
Communications
Port
COM1
COM2
MPI Card
CPU Address:
Micro/WIN Address:
Baud Rate:
9,600
IRQ Number For MPI Card::
10
OK
Cancel
Find
2
0
Highest Master Address:
31
Target Token Rotation Time::
39
S7-200 Programmable Controller, CPU 210
C79000-G7076-C235-01