Operating The High-Spec Wired Remote Controller (Cz-Rtc3) - Panasonic S-224ME2E5 Installation Instructions Manual

8-3. Operating the High-spec Wired Remote
Controller (CZ-RTC3)
How to set the external static pressure
1. Keep pressing the
buttons simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the
LCD display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
2. Press the or
menu. If you wish to see the next screen instantly,
press the or
Select "8. Detailed settings" on the LCD display
and press the
Maintenance func
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Sel.
The "Detailed settings" screen appears on the LCD
display.
Select the "Unit no." by pressing the
button for changes.
Detailed settings
Unit no.
3-1
Sel. Next
3. Select the "Code no." by pressing the
button.
Change the "Code no." to "5D" by pressing the
or button (or keeping it pressed).
, and
20:30 (THU)
Page [ ] Confirm
button to see each
button.
button.
20:30 (THU)
Page [ ] Confirm
20:30 (THU)
Code no. Set data
0006
10
4. Select the "Set data" by pressing the
Select one of the "Set data" among "0006", "0003"
or "0001" according to the desired external static
pressure setting by pressing the
button.
Then press the
(See the table below.)
Then press the
224
External static pressure of the rated
air flow volume (Pa)
270 Pa
140 Pa
60 Pa
5. Select the "Unit no." by pressing the
The "Exit detailed settings and restart?" (Detailed
setting-end) screen appears on the LCD display.
Select "YES" and press the
When the setting is completed, perform the
test run for the external static pressure setting
described in "Auto External Static Pressure Setting
Operation".
or
or
22
Detailed settings 20:30 (THU)
Unit no. Code no.
3 1 - 5D
Sel. Next
button.
button.
button.
Indoor unit
280
270 Pa
140 Pa
72 Pa
button and press the
Detailed settings 20:30 (THU)
Exit detailed settings
Unit no. Code no.
and restart?
1-1 10
YES NO
Sel. Next
Set data
0 0 1 0
or
or
Item code
5D
0006
0003
0001
or
button.
button.
Set data
0001