How To Set Fresh Air Intake Mode - Panasonic S-224ME2E5 Installation Instructions Manual

9-2. How to Set Fresh Air Intake Mode

N OTE
Contents are the same as the 2WAY VRF system and 3WAY VRF system.
■ Attachment of Fresh Air Intake Mode Label
Attach the following label included with the indoor unit below the rating nameplate on the lid of the electrical
component box.
9-2-1. Setting Changes by Timer Remote Controller
(CZ-RTC2)
1. Press and hold down the
simultaneously for 4 or more seconds.
( , the Unit No., Item Code and Detailed Data
will blink on the LCD display.)
2. The indoor unit numbers in the group control will
be sequentially displayed whenever the Unit Select
button is pressed
Only the fan motor for the selected indoor unit will
operate during this time.
3. Specify the " " item code by pressing the
/ buttons for the temperature
setting buttons and confirm the values.
(" " set at shipment )
4. Press the /
the values for the set data "
5. Specify the " " item code by pressing the
/ buttons for the temperature
setting buttons and confirm the values.
(" " set at shipment )
6. Press the /
the values for the set data "
N OTE
Discharge temperature may decrease and become
shortage of capacity if the value set at shipment
remains.
7. Press the button.
The display will stop blinking and remain
illuminated.
8. Press the button. The fan motor will stop
operating and the LCD display will return to the
normal stop mode.
N OTE
When returning to the duct setting, set the "
code to the set data "
data " ".
, and
.
buttons for the time to amend
" .
buttons for the time to amend
" .
", and the " " to the set
buttons
1
Item code
temperature
" item
26
5
6 1
4
Setting data
No.
Heating
discharge
shift
2
3
CZ-RTC2
Set value of
heating discharge
temperature
45ºC