Specifications - JRC JHS-183 Installation Manual

CONFIGURATION AND SPECIFICATIONS

1.3 Specifications

1.3.1 JHS-183 Automatic Identification System
(1) General Specification
Frequency range
Channel spacing
Frequency accuracy
Type of emission
Type of modulation
Output power
Type of display
keyboard
Back-light
Dimmer control
Compass safe distance
Performance criteria
Power voltage
Current consumption
Operating temperature range
Storage temperature range
Humidity resistance
Vibration resistance (3 axes)
Protection rating
Dimensions and mass
(2) Communication ports
(2.1) Communication ports
The communication ports using the attached cable (CFQ-9183A) are as follows.
Sensor data input ports
GNSS differential correction data
input port
External display equipment
communication ports (AUX)
Pilot plug
Network(LAN)
1-6
156.025MHz to 162.025MHz
Default channel AIS1: 161.975MHz, AIS2: 162.025MHz
25kHz
-6
Within ±3×10
G1D (F1D), G2B (F2B)
GMSK, FSK
12.5W/1W
4.5-inch FSTN LCD, 128 x 64dot
12 keys
LCD and keyboard
Bright, Medium1, Medium2, Off
NTE-183; Standard compass 0.4m, Steering compass 0.2m
NCM-983; Standard compass 0.5m, Steering compass 0.3m
NQE-5183; Standard compass 0.7m, Steering compass 0.5m
NBD-577C; Standard compass 0.8m, Steering compass 0.5m
Typ. 24VDC, 19 - 35VDC
24VDC Input
3.0A max. (when transmitting),
1.0A max. (when receiving)
AIS transponder (NTE-183) -25°C to +55°C
AIS controller (NCM-983) -15°C to +55°C
-15°C to +55°C (exposed equipment; -25°C to +70°C)
No abnormality after standing 4 hours in +40°C, 93% RH
2 Hz - 5 Hz to 13.2 Hz:
13.2 Hz to 100 Hz:
No abnormality after testing resonance points or at 30 Hz for more
than 2 hours
AIS transponder (NTE-183): IP56
AIS controller (NCM-983): IP55 (In case optional cable is not used.)
AIS transponder (NTE-183)
145mm(W) x 1270mm(H) x 145mm(D)
approximately 2.6kg
AIS controller (NCM-983)
142mm(W) x 142mm(H) x 115mm(D), approximately 2.1kg
SENSOR1 / SENSOR2
Two input ports meet the requirements of IEC 61162-1 and 61162-2
ITU-R M.823-2 1port
IEC61162-2 1ports
IEC61162-2 1port
IEC61162-450 1port
: Full amplitude ±1 mm±10%
: Maximum acceleration 7 m/s
fixed
,
[including VHF antenna]
2